XT2000+ Adhesive is a high-strength adhesive with aggressive initial tack and permanent flexible bond that adheres rigid vinyl wall covering to a variety of substrates. XT-2000+ Adhesive is the next generation version of XT-2000 which has thousands of trouble free, time proven installations to its credit.

• Freeze-thaw stable

• One coat application reduces labor costs

• Wall covering can be repositioned during installation

• Water-based with no offensive odor

• Heat resistant to 150°F

• Spreads easily

• Non-flammable, minimal VOC content

• Easy, water clean-up

• Meets Class 1/A fire rating standards for .040 or thinner guage sheets

XT2000+ Primer is a water-based primer designed for sealing and priming wallboard and concrete block prior to applying XT-2000+ Adhesive to install rigid vinyl wall covering.

• Inhibits Polyvinyl Acetate (found in most joint compounds, low cost paints and sealers) from adversely reacting with the XT-2000+ Adhesive.

• Allows vinyl wall covering to be shifted or repositioned during the installation.

• Wall covering can be sized, trimmed, mounted and realigned without tearing the gypsum wallboard.

• Brush or roller application

XT2000+ Trowel is a uniquely designed 1/8" V-Notched Trowel for economically spreading XT-2000+ Adhesive.

• Greater spread rate: coverage approximately 125-150 sq. ft./gal.

• Adhesive cost reduced by up to 40% compared to traditional trowels

• Bonding capabilities are not sacrificed